产品信息 - ASTM A270 Seamless and Welded Austenitic and Ferritic and Austenitic Stainless Steel Sanitary Tubing->weld steel pipe

添加会员

求助

Junfun International Trade Co.,Ltd

回首页

公司简介

产品橱窗

影音视听

寄出询问函

联络我们

	Recommended Results

ASTM A270 Seamless and Welded Austenitic and Ferritic and Austenitic Stainless Steel Sanitary Tubing

产品分类 :

冶金礦產->重金屬->銲接鋼管

ASTM A270 Seamless and Welded Austenitic and Ferritic and Austenitic Stainless Steel Sanitary Tubing

产品规格

Model No: ASTM A270

Country	CN
Brand	JUNFUNSTEEL

产品描述

Scope
1.1 This specication covers grades of seamless, welded, and heavily cold worked welded austenitic and ferritic/austenitic stainless steel sanitary tubing intended for use in the
dairy and food industry and having special surface nishes. Pharmaceutical quality may be requested, as a supplementary requirement.
1.2 This specication covers tubes in sizes up to and including 12 in. (304.8 mm) in outside diameter.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical
conversions to SI units that are provided for information only and are not considered standard.
1.4 Optional supplementary requirements are provided, and when one or more of these are desired, each shall be so stated in the order
2. Referenced Documents
2.1 ASTM Standards:2
A 262 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A 480/A 480M Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A 923 Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
A 967 Specification for Chemical Passivation Treatments for Stainless Steel Parts
A 1016/A 1016M Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
E 527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
2.2 ASME Standard:
B46.1 Surface Texture (Surface Roughness, Waviness, and Lay)3
2.3 ASME Boiler and Pressure Vessel Code: Section VIII Pressure Vessels3
2.4 Other Standard: SAE J1086 Practice for Numbering Metals and Alloys(UNS)4
3. Terminology
3.1 Definition:
3.1.1 roughness average, Ra, n-arithmetic average surface roughness normally reported in microinches or microns; a
measurement of surface roughness usually performed by moving a stylus in a straight line along the surface, although other methods may be used.


[ 返回产品型录 ]

Commerce 会员: 请登录您的帐号跟口令,系统将为您填入您的相关资料

帐号:

口令:

记住我的帐号


	填写下列表格并寄送询问函．所有的询问信函将会自动寄发给你想联络的公司

	主題
	內容	（请勿输入公司名称、Email、电话、传真、网址）

公司简介:

* 公司名称

*E-mail

*国家

*联络人

网址

*电话

- -

传真

- -

*邮递区号

*城市

*街道地址

*企业形态

批发商出口商进口商制造商
大盘商零售商代理商 Retrofitter 使用者
其他, 请详细说明:

*安全口令


请输入所显示的安全口令