产品信息 - 1/4", 3/8",1/2" and 1" Dr. Pre-setting Click Adjustable Torque Wrench ->torque wrench

添加会员

求助

Shaoxing Tongli Tool Manufacture Co.,Ltd

回首页

公司简介

产品橱窗

影音视听

寄出询问函

联络我们

	Recommended Results

1/4", 3/8",1/2" and 1" Dr. Pre-setting Click Adjustable Torque Wrench

产品分类 :

機械與設備->五金及工具->手工具->扭力板手

1/4", 3/8",1/2" and 1" Dr. Pre-setting Click Adjustable Torque Wrench

产品规格

Model No: BA

Country	CN
Brand	OEM
Materials	Alloy Alu
Size	1/4",3/8"1/2",3/4",1" and 1-1/2" inches
Weight	3kgs
Color	silver
Packing	Plastic mould case
Minimum Order	50pcs
Payment Term	T/T,Wester Union

产品描述

BA TYPE PRE-SETTING CLICK TORQUE WRENCH/Pre-setting Click Adjustable Torque Wrench
1. Character:
1)It has the function of pre-setting torque value and signal device. You can hear the sound Click when arrive at the scheduled torque, meanwhile, you have the obvious feeling of hand vibration. Automatic recovery when the action released.
2).Special high quality aluminum alloy material shell.
2. Operation :
Instructions
1.-Pull the torque adjustment lever(P1) out from barrel
2.-Determine the correct torque value needed.
3.-Turn the torque adjustment clockwise or anticlockwise(P1-2),unitl the reading shows the desired torque on the main scale(P2),marked on the internal cylinder.For intermediary values use the secondary scale(P3).
4.-Install the socket properly on the torque wrench square driver and then,the socket on the workpiece.
5.-Lock the adjustment system by pushing the lever device(P1-2) back to its original position(P1),inside the torque wrench barrel. Since the rotation center is the same as the square drive center,the load can be applied on any barrel position(P5).
6.-Apply the load slowly and constantly,always paying attention to the clockwise or anticlockwise arrow indicated on the torque wrench(P6),until reaching the adjusted torque.
7.-Stop applying load when you hear a "click" signal. This means that pre-setted torque has been applied.
OEM is acceptable and Calibration certificates is available.

其他类似产品