产品信息 - Vag K+Can Commander v2.0(New)->automobiles diagnostic

添加会员

求助

Linkice Technology Co., Ltd.

回首页

公司简介

产品橱窗

影音视听

寄出询问函

联络我们

	Recommended Results

Vag K+Can Commander v2.0(New)

产品分类 :

交通運輸->其他->車輛診斷

产品规格

Country

产品描述

Vag K+Can Commander v2.0(New)

Features:

Diagnostic via CAN and Special functions via K-line.
Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0.
Manual definition of running diagnostic session IC not like remaining diagnostic tools always standard diagnostic session 0x89. Function is under CAN-TP2.0.
Broadcast diagnostic request IC disable normal communication, clear DTCs, Logistic (transport) mode,.... Functions are under CAN-TP2.0.
Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Functions are under CAN-TP2.0.
Most of popular diagnostic requests IC identifications, coding, adaptations, DTCs and s.o. Functions are under CAN-TP2.0.
Special function - odometer correction in instrument clusters and EDC15x.
Special function - read Security Access Code/Login WFS.
Special function - read/program immobilizer data.
Special function - read/write EEPROM from instrument cluster/immobilizer. All supported clusters CAN/K.
Special function - VAG MMI TV Activation.
Special function - Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic ME7.8,Porsche.
Special function - Key learning buttons for easy usage (not needed security code). Can do component security authorization.
Special function - Key learning Porsche CAYENNE (not needed security code) K+CAN.
Special function - Custom memory reading from different units like ECUs, EZS-Kessy and s.o..
Special function - Reading flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with next update will be possible programming of flash memories
Special function - Crash data clear in airbag units
List of vehicles covered from function odometer change via OBDII:

Audi Q7 (CAN)
Audi A2 (K)
Audi A3 (CAN) up to 2008 !!!
Audi A3 VDO/M73 up to 2005 (K)
Audi A4 VDO/M73 (K)
Audi A4 BOSCH - RB4 clusters (CRYPTO eeproms R/W by OBDII)
Audi A6 VDO (K)
Audi A6 (CAN)
Audi Allroud (K) up to 2005
Audi A8 (K) VDO93xx
Audi A8 (CAN) up to 2007 !!!
Audi TT (K)
Seat Alhambra (K)
Seat Altea (CAN)
Seat Arosa (K)
Seat Cordoba after 2000 (K)
Seat Ibiza VDO after 2000 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia (K)
Skoda Octavia II (CAN)
Skoda Superb (K)
Skoda Roomster (K)
Skoda Scout (CAN)
Skoda Fabia (K)
VW Bora (K)
VW Beetle (K)
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer/BOSCH RB
VW Golf5 VDO (CAN)
VW Golf5 VISETEON
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5/B6 (K+CAN)
VW Polo VDO/Motometer (K)
VW Sharan (K)
VW T4/T5 VDO (K)
VW Touaran VDO (CAN)
List of vehicles covered from function security access code/login reading via OBDII:

Audi A2
Audi A3 (CAN) up to 2007 !!!
Audi A3 VDO/M73 up to 2005 (K)
Audi A4 VDO (K)
Audi A4 BOSCH (K) up to 2003
Audi A4 after 2000 - petrol engines >= 1.8
Audi A6 VDO (K)
Audi A6 (CAN) petrol engines
Audi Allroad (K) up to 2004
Audi Allroad (CAN) petrol engines
Audi A8 up to 2001
Audi A8 from 2001 to 2002 2.5TDI
Audi A8 (CAN) 2003+ petrol
Audi TT (K)
Audi Q7 petrol engines
Seat Altea (CAN)
Seat Cordoba after 1999 (K)
Seat Ibiza (VDO) after 1999 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia
Skoda Octavia II (CAN)
Skoda Superb
Skoda Roomster
Skoda Scout (CAN)
Skoda Fabia
VW Bora
VW Beetle
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer/BOSCH RB
VW Golf5 VDO (CAN)
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5 (K) B6(CAN)
VW Polo5
VW Sharan after year 2000
VW T5
VW Phaeton petrol
VW Touareg petrol
VW Touaran VDO (CAN)
PORSCHE Cayenne (CAN/K)
Current version 2.0covers VW/SEAT/SKODA (CAN) up to September 2006 while AUDI covered up to 2008

其他类似产品

T300 Key Programmer V6.52( NEW !!)


[ 返回产品型录 ]

Commerce 会员: 请登录您的帐号跟口令,系统将为您填入您的相关资料

帐号:

口令:

记住我的帐号


	填写下列表格并寄送询问函．所有的询问信函将会自动寄发给你想联络的公司

	主題
	內容	（请勿输入公司名称、Email、电话、传真、网址）

公司简介:

* 公司名称

*E-mail

*国家

*联络人

网址

*电话

- -

传真

- -

*邮递区号

*城市

*街道地址

*企业形态

批发商出口商进口商制造商
大盘商零售商代理商 Retrofitter 使用者
其他, 请详细说明:

*安全口令


请输入所显示的安全口令