Shin Nan Casting Factory Co. , Ltd.

添加会员

求助

回首页

公司简介

产品橱窗

影音视听

寄出询问函

联络我们

	Recommended Results

产品型录

共10 笔产品

选定全部

取消全部

1. T-Bar Restrained Joint

◎The T-Bar restrained joint is designed according to ISO 10804-1 1996 (E) “Restrained joint system for ductile iron pipelines”. The joint is consisted of a traditional push-in T type socket, a welded stays ring at the spigot end, two split ...

2. Resilient Seated Gate Valves

Standards：Conforms to BS 5163, JWWA B120, GB13295-91
Types：Handwheel and Operating-Key type
Outstanding properties：
　＊Water tightness
　＊Easy operation
　＊Safety
　＊Long service life
　＊Easy maintenance

3. Pipes for Jacking Method

Standards ：ISO 2531, EN 545, and EN 598
Internal Lining：Portland cement, sulfate resistant cement, aluminous cement, or blast furnace cement mortar, epoxy, polyurethane (PU)
External layer：
　For 6m pipe：Portland cement or sulfate ...

4. Pipes & Fittings for Gas & Industrial Application

Standards ：EN 969 and other industrial standards
Internal Lining：Epoxy, polyurethane (PU), to the purchaser’s order
External Coating：Zinc primer, bitumen, epoxy paint, to the purchaser’s order

5. Fittings for Sewerage Application

Standards ：EN 598, and ISO 2531
Internal Lining：Epoxy, polyurethane (PU), etc.
External Coating：Zinc primer, bitumen, epoxy paint, and additional PE sleeve

6. Pipes for Sewerage Application

Standards ：EN 598, and ISO 2531
Internal Lining：High aluminous cement or blast furnace cement mortar, polyurethane (PU), etc.
External Coating：Zinc primer, bitumen, epoxy paint, and additional PE sleeve

7. Fittings for Reclaimed Water Applcaion

Standards ：ISO 2531，BS 4772，EN 545，and EN 598
Internal Lining：Epoxy paint, fusion bonded epoxy, bitumen, polyurethane (PU), etc.
External Coating：Zinc primer, bitumen, epoxy paint, and additional PE sleeve

8. Pipes for Reclaimed Water Application

Standards ：ISO 2531，BS 4772，EN 545，and EN 598
Internal Lining：Sulfate resistant cement, blast furnace cement or aluminous cement mortar, polyurethane (PU), etc.
External Coating：Zinc primer, bitumen, epoxy paint, and additional ...

9. Fittings for Potable Water Application

Standards ：ISO 2531，EN 545，and BS 4772
Internal Lining：Portland cement or sulfate resistant cement mortar, fusion bonded epoxy, polyurethane (PU), etc.
External Coating：Zinc primer, bitumen, epoxy, and additional PE sleeve
Type ...

10. Pipes for Potable Water Application

Standards ：ISO 2531，EN 545，and BS 4772
Internal Lining：Portland cement or sulfate resistant cement mortar, polyurethane (PU), etc.
External Coating：Zinc primer, bitumen, epoxy, and additional PE sleeve
Type of Joint：Mechanical, ...